HF-ULA

USB 1.1 to LAN Adapter. USB 10/100 Ethernet Adapter for PC computers. It's the easy way to connect your laptop or desktop computers to a broadband Internet modem, or building a 10/100 Base-T Ethernet network. Retail Package.

 HF-UIA

Compliant with USB 2.0 & USB 1.1. Drive Support: 3.5", 5.25" & 2.5" EIDE drives. Connectors: USB A port to IDE 40-pin female for 3.5" ide hard drive or 5.25" ide drives. 2.5" Laptop Drives (powers the drive from the USB port, no additional external power is required.) Supports various kinds of ATA /ATAPI based mass storage device port. USB 2.0 High Speed (480Mbit) and Full speed (12Mbit). Support Self-Power modes for 2.5" hard drives. Consume low electricity.  One adapter with both 40pin and 44pin.

HF-UISA3H

Access any 2.5-in, 3.5-in, or 5.25 IDE drive or SATA 3.5-in through the Hi-Speed USB 2.0 port - Unlike IDE, a Serial ATA connector is the same design regardless of drive size Compatible with any IDE or SATA drive of any brand or size 2A AC power supply ensures power for the most power-hungry devices Plug N Play - easy hot swapping Windows 98SE, ME, 2000, or XP. No drivers necessary.

HF-SIA

Serial ATA SATA to IDE Ultra ATA-100/133 Mini Converter This SATA-to-Ultra ATA-133 Converter Board is a converter solution for the Parallel Ultra ATA Device. It has a standard 40 pin ATA port can interface to a parallel Ultra ATA (IDE) devices (hard disk, CDROM, etc). It accepts SATA commands through the Serial ATA interface from the host, decodes the commands and converts them to parallel ATA commands to the device. Response from the device through the parallel ATA bus are deciphered, processed and converted to SATA protocol and sent to the host.

HF-ISA

This small board attaches to Ultra ATA ATAPI compliant controller with a standard 40-pin EIDE. Converts ATA IDE Controller to Serial ATA. Supports Serial ATA hard drive by IDE controller card. Compliant with Serial ATA 1.0 specification. Supports single Serial ATA device. Data transfer rate up to 1.5 Gbps (150 MB/s). 1 x 40 pin IDE connector for ATAPI hard drive. 1 x Serial ATA port for host connection. 1 x 4-pin power connector. ATA/100 or ATA/133 IDE hard drive. 4-pin power cable. Sata cable.

HF-VC2H

SVGA 15pin Cable 6' M-M/M-F

HF-UPS2C

USB to (2) PS/2 Adapter Cable. Allows you to connect two PS/2 devices and convert them to one USB connection.Typically used for PS/2 Mouse and PS/2 Keyboard.

HF-DVC

DVI is the latest digital video interconnect standard established by the DDWG (Digital Display Working Group). These fully molded adaptors provide transition from DVI to both VGA (HD15) and DFP interfaces. Compact in size these adaptors are very useful in dealing with difficult

HF-UParallelA

USB to Parallel PRINTER CABLE IEEE 1284! Centronics 36 Male to USB Type A Male Cable. IEEE 1284 Compliant. Plug & Play - automatic detection and installation of peripherals. 6 Ft. This Printer Cable connects USB and IEEE-1284 parallel port on any peripherals. This is the best solution to converts USB signal to parallel port signals, which is also compatible with most printers' supported drivers. With bi-directional technique, this cable makes the communication completely either from USB port to parallel port or from parallel port to USB port.